top of page

PMCA PNEUMATIC

Polyurethane Foam. Plural Component Proportioner.

PMCA-20.jpg

Technical specifications

Output:
4.54 liters/min
Max Working Pressure:
2,400 psi
Max Hose Length:
94.5 m
Heater Wattage:
7,500 watts Total (Single Heater)
Hose Heating Power:
190 F (87.7 C)
Air Consumption @ 100 psi (6.9 bar):
26 scfm
Main Voltage:
1 x 208-230V, 50/60 Hz
Electrical @ 230V Single Phase:
45A–7,500W heaters
Main Voltage:
3 x 208-230V, 50/60 Hz, 3 x 380V, 50/60 Hz
Dimensions:
101cm x 48.cm x132cm
Weight:
113.4 kg

Features and characteristics

The PMCA Series of proportioners is air driven with opposed piston pumps. This unit ranges in outputs to 20 lbs/min (9.07 kg/min) at up to 1600 psi (110 bar) and outputs to 1.2 gal/min (4.54 liters/min) at up to 2400 psi (165 bar). This series is ideally suited for in-plant operations such as spa insulations, bed-liner or cavity fill.

Air Driven Proportioner:  Double ended piston air driven motor.

Opposed Piston Metering Pumps:  The horizontal configuration of these in-line metering pumps helps to eliminate uneven loading during the pumping cycle. Provides minimal fluctuations in spray pressures.

New Pump Base:  The Newly Designed Pump Bases ensure pressure stability hroughout the cycle and provide user friendly access for preventive maintenance.

Digital Automatic Temperature Control:  Digital controllers allow the operator to precisely program the set temperature to suit the chemical system being used. Used in concert with the Newly Designed PMC Temperature Sensing Unit (TSU), the Classic Series will provide accurate and consistent Hose Heat to ensure the most effective yield for your product under varying conditions.

Open Frame Design:  Allows the operator full view and easy access to all the critical components of the proportioner.

Relay Logic Control:  Point to point wiring in series with relays and circuit breakers minimize the use of printed circuit boards in all control functions.

Heaters:  The PMCA Series is available with one mass aluminum heater per unit for consistent heating.

Ratio:  Standard Classic units are sold with a 1:1 Ratio

ISO Lube System:  Standard on all PMCA series units to help flush the ISO pump shaft resulting in longer seal life.

Heater Tap Settings:  Standard terminal block tap settings for your particular hose length.

شركة يلما للتجارة

تمثل الشركة الشركات المصنعة المشهورة عالميًا لمعدات العزل المائي والمواد الكيميائية وقطع الغيار والخدمات.

نحن نفخر بخدمة منطقة الشرق الأوسط بأكملها وآسيا وأفريقيا بالمواد والآلات والمنتجات المبتكرة ذات الصلة للعزل الحراري والطلاء الواقي وصناعة مكافحة التآكل.

المملكة العربية السعودية

شركة يلما للتجارة

شارع دلم، السلي،
الرياض-14263، المملكة العربية السعودية
الهاتف: +966 11 241 1337
الجوال: 055 0974205 / 050 7882613
معلومات عنا@yelma-seal.com
www.yelma-seal.com

الامارات العربية المتحدة

برايم سيل للمواد العازلة والوقائية ذ.م.م.

صندوق بريد 115563، دبي، الإمارات العربية المتحدة.
الهاتف: +971 43330172 / 3205568
المبيعات@prime-seal.com
www.prime-seal.com

  • آلات مقاومة المياه

  • المواد الكيميائية

  • أشرطة مقاومة للتآكل

  • المواد المانعة للتسرب

  • منتجات السلامة

  • الإضاءة الصناعية

  • معدات الاغلاق

  • مضخات المياه

  • عدادات التدفق      

  • الأجهزة

دعونا نبدأ

هل تريد المزيد من المعلومات؟

تواصل مع أحد ممثلي المبيعات لدينا للحصول على المساعدة بشأن أي استفسارات قد تكون لديك.

هل تحتاج إلى مساعدة في العثور على المنتج المناسب؟

قم بإلقاء نظرة على مجموعة منتجاتنا الكاملة مع جميع الخيارات المتاحة بما في ذلك الكتالوجات الخاصة بكل منتج.

© جميع الحقوق محفوظة لشركة Yelma Seal.

صمم بواسطة Yelma Seal

bottom of page