top of page

PMC PH-40 HYDRAULIC

Polyurethane Foam and Polyurea

PMC-PH-40.jpg

Technical specifications

Output:
40 lbs/min(18.14 kg/min)
Max Working Pressure:
2,000 psi (138 bar)
Max Hose Length:
410 ft (121.9 m)
Heater Wattage:
15,000 watts Total (Dual htr), 18,000 watts Total (Dual htr), 21,000 watts Total (Dual htr)
Hose Heating Power:
120 Volts
Max Fluid Temperature:
190 F (87.7 C)
Air Consumption @ 100 psi (6.9 bar)
Not Applicable
Main Voltage:
1 x 208-230V, 60 Hz
Electrical @ 230V Single Phase:
116A–15,000W heaters, 129A–18,000W heaters, 142A–21,000W heaters
Main Voltage:
3 x 208-230V, 50/60 Hz, 3 x 380V, 50/60 Hz
Electrical @ 230V Three Phase:
67A–15,000W heaters, 75A–18,000W heaters, 82A–21,000W heaters
Dimensions:
(101cm x 66cm x 132cm)
Weight:
251.7 kg

Standard Features

The PMC “Classic” Series PH/PHX was “Designed with the Customer in Mind” to provide applicator friendly and serviceability to meet today’s market place demands.

The electrical console has been designed to eliminate the use of delicate circuit boards and displays.

The open frame design format allows easy access to all components. Automatic ISO lubrication system.

Manual Hose Heat Tap Settings to match length of hose being used. Pressure Balance Control (PBC).

The reversing system is initiated by proximity switches and controlled by solid state relays to virtually assure maintenance free operation and long service life.

The Auto Shut Down Counter stops the machine before the drum runs empty avoiding possible cavitation, downtime and spraying off ratio material. The counter is adjustable to be set by the operator.

Point to Point wiring scheme makes troubleshooting a snap. All components are easily replaceable and readily available.

Opposed piston pumping is the industry benchmark and includes durable and easily serviceable ball checks.

The temperature sensing unit (TSU) operates in real time, sending a signal to the controller to maintain the chemical at the optimum temperature. The hermocouple that reads the temperature can be quickly replaced without removing the TSU block, a unique design feature that saves time and money.

Available up to 21Kw of heat, 2000-3500 psi and fixed ratios of up to 1.5:1, 2:1, 3:1, & 4.3:1.

شركة يلما للتجارة

تمثل الشركة الشركات المصنعة المشهورة عالميًا لمعدات العزل المائي والمواد الكيميائية وقطع الغيار والخدمات.

نحن نفخر بخدمة منطقة الشرق الأوسط بأكملها وآسيا وأفريقيا بالمواد والآلات والمنتجات المبتكرة ذات الصلة للعزل الحراري والطلاء الواقي وصناعة مكافحة التآكل.

المملكة العربية السعودية

شركة يلما للتجارة

شارع دلم، السلي،
الرياض-14263، المملكة العربية السعودية
الهاتف: +966 11 241 1337
الجوال: 055 0974205 / 050 7882613
معلومات عنا@yelma-seal.com
www.yelma-seal.com

الامارات العربية المتحدة

برايم سيل للمواد العازلة والوقائية ذ.م.م.

صندوق بريد 115563، دبي، الإمارات العربية المتحدة.
الهاتف: +971 43330172 / 3205568
المبيعات@prime-seal.com
www.prime-seal.com

  • آلات مقاومة المياه

  • المواد الكيميائية

  • أشرطة مقاومة للتآكل

  • المواد المانعة للتسرب

  • منتجات السلامة

  • الإضاءة الصناعية

  • معدات الاغلاق

  • مضخات المياه

  • عدادات التدفق      

  • الأجهزة

دعونا نبدأ

هل تريد المزيد من المعلومات؟

تواصل مع أحد ممثلي المبيعات لدينا للحصول على المساعدة بشأن أي استفسارات قد تكون لديك.

هل تحتاج إلى مساعدة في العثور على المنتج المناسب؟

قم بإلقاء نظرة على مجموعة منتجاتنا الكاملة مع جميع الخيارات المتاحة بما في ذلك الكتالوجات الخاصة بكل منتج.

© جميع الحقوق محفوظة لشركة Yelma Seal.

صمم بواسطة Yelma Seal

bottom of page