Technical specifications
- Output: 14.06 kg/min
- Max Working Pressure: 2,000 psi
- Max Hose Length: 94.5 m
- Heater Wattage: 8,000 watts Total (Dual Heater)
- 10,000 watts Total (Dual Heater)
- 12,000 watts Total (Dual Heater)
- Hose Heating Power: 90 Volts
- Max Fluid Temperature: 190 F (87.7 C)
- Air Consumption @ 100 psi (6.9 bar): Not Applicable
- Main Voltage: 1 x 208-230V, 60 Hz
- Electrical @ 230V Single Phase: 68A–8,000W heaters
- 77A–10,000W heaters 68A–8,000W heaters
- 86A–12,000W heaters 68A–8,000W heaters
- Main Voltage: 3 x 208-230V, 50/60 Hz,
- 3 x 380V, 50/60 Hz
- Dimensions: 101cm x 66cm x 132cm
- Weight: 113.4 kg
Features and characteristics
The PMC “Classic” Series PH/PHX was “Designed with the Customer in Mind” to provide applicator friendly and serviceability to meet today’s market place demands.
The electrical console has been designed to eliminate the use of delicate circuit boards and displays.
The open frame design format allows easy access to all components.
Manual Hose Heat Tap Settings to match length of hose being used.
Available up to 15Kw of heat, 2000-3000 psi and fixed ratios of up to 1.5:1, 2:1, 3:1, & 4.3:1.
The reversing system is initiated by proximity switches and controlled by solid state relays to virtually assure maintenance free operation and long service life.
The Auto Shut Down Counter stops the machine before the drum runs empty avoiding possible cavitation, downtime and spraying off ratio material. The counter is adjustable to be set by the operator
Point to Point wiring scheme makes troubleshooting a snap. All components are easily replaceable and readily available.
Opposed piston pumping is the industry benchmark and includes durable and easily serviceable ball checks.
The temperature sensing unit (TSU) operates in real time, sending a signal to the controller to maintain the chemical at the optimum temperature. The thermocouple that reads the temperature can be quickly replaced without removing the TSU block, a unique design feature that saves time and money.